Ivan's wiki

Site Tools

terminal

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
terminal [February 09, 2026 at 11:17] – yanevskivterminal [May 14, 2026 at 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +# Terminal
 +**Terminal** is conceptually anything that looks like a keyboard + a screen attached to a teletype device (TTY). It gives humans the ability to use the teletype device.
  
 +When you type something in a terminal, the terminal sends your characters to the teletype device. When a teletype device responds, the terminal prints the result back to you. A terminal can also reinterpret the characters coming from the teletype device and change its behavior in some way (e.g. change cursor location or turn on colors). 
 +
 +A terminal is thus a way for humans to communicate with a teletype device. Often there is a program sitting on the other end of a teletype device. This program can be anything (vim, echo, cat, sh, grep, ...) but in pretty much all cases, that program is the [[shell|shell]] such as Bash.
 +
 +
 +
 +## Screen
 +The terminal screen consists of a rectangular grid of characters. The standard grid size is 80x24 characters. This is inherited from a historic hardware terminal called [VT100](https://en.wikipedia.org/wiki/VT100). Conceptually, a character grid is similar to a pixel matrix. But unlike pixels of an image, you can only edit one character at the time at the location of the cursor.
 +
 +## Cursor
 +Cursor represents the location where a printable character is going to be drawn next when it's read from a teletype. In a graphical environment, you have access to pixels. You can change colors of those pixel in any order you like. In a terminal environment, you have to move the cursor first, draw something at the location of the cursor, then move the cursor to somewhere else. This is how [[curses]] works for example.
 +
 +## Scrollback
 +Scrollback lets you see the terminal history. Usually you invoke it by pressing 'Ctrl + PgUp' or 'Ctrl + PgDown'. Scrollback size is measured in the number of rows to keep. Different terminals offer different ways to configure the scrollback (usually somewhere in their Settings menu). But scrollback is often unreliable, often impossible to change and often fills up easily (meaning you can't scroll up further). This is why [[pager|pagers]] like `less` or `more` exist. They allow you view large amounts of text much more conveniently than scrollback.
 +
 +## Clear
 +The `clear` command clears the screen. It pushes empty rows until nothing is visible and then resets the cursor to the top left. Often, it does not clear the scrollback so you can still use 'Ctrl + PgUp' to read the history. It also does not fix the terminal state. If for example your terminal colors go crazy, clear command will NOT help with that.
 +
 +## Reset
 +The `reset` command resets the terminal. It clears the screen (same as: `clear` command), but also resets the terminal to a sane default state (same as: `stty sane` command). If your terminal ever gets badly damaged -- and you can barely see what you're typing -- just blindly type in "reset" and hit enter. This is the nuclear option for fixing the terminal.
 +
 +## Echo (Command)
 +The `echo` command writes the arguments back to the teletype, verbatim.
 +```
 + $ echo Hello
 +Hello
 +```
 +
 +When you type `echo Hello` in the terminal shell and hit Enter, what you're actually doing is writing a sequence of bytes `65 63 68 6f 20 48 65 6c 6c 6f 0d` to the teletype, one byte at a time. The [[shell|shell]] on the other end of the teletype collects those bytes and, when it encounters the newline byte `0d`, it decides "Okay, the user wants me to start the 'echo' command with 'Hello' as the argument". It creates the `/usr/bin/echo` process, provides "Hello" to its argv[1], and rewires its stdout to the teletype.
 +
 +The echo command writes `48 65 6c 6c 6f` to the teletype and dies. Your terminal then reads the teletype one byte at a time and reads `48`, prints 'H', moves cursor to the right, reads `65`, prints 'e', moves cursor to the right, reads `6c`... you get the idea. This is repeated until "Hello" is written on the screen.
 +
 +## Keyboard
 +The keyboard works mostly as you would expect in the terminal. When you press the letter 'A', a byte `61` is written to the teletype device. This byte represents the small letter 'a' according to the [ASCII table](https://www.asciitable.com/). A japanese character 'あ' is reprsented by a [Unicode](https://en.wikipedia.org/wiki/List_of_Unicode_characters) point U+3042. This unicode point is serialized as 3 bytes `e3 81 82` according to [UTF-8](https://en.wikipedia.org/wiki/UTF-8) way of encoding it. Thus, if you have a UTF-8 keyboard and type 'あ' in the terminal, three bytes `e3 81 82` will be written to the teletype device.
 +
 +The troubles start to arise when you try to use modifier keys like **Shift**, **Control**, **Meta** (a.k.a. Alt), **Super** (a.k.a. Windows key) but also special keys like function keys F1-F12, arrow keys, page up, page down, home, delete, etc.
 +
 +Shift key mostly stays true to its original mearning. When you press 'Shift + A' in the terminal, a byte `41` is written to the teletype device instead of `61` -- corresponding to uppercase 'A' instead of lowecase 'a' respectively. But it's not the terminal doing the shifting -- it's the kernel! In fact, there is no way for the terminal to detect a shift key at all. A shift key by itself is simply unencoded.
 +
 +Control key is used to send a signal to the program. When you press 'Ctrl + C' in the terminal a byte `03` to the teletype device. The teletype device sees this and -- instead of delivering the byte to the program on the other end of a teletype device -- it asks the kernel to send `SIGINT` to the program (interrupt signal). This is the default behavior when a teletype device is put "cooked" mode. When a teletype device is put in "raw" mode, it does deliver the byte `03` to the program. Shift key makes no difference when used with Ctrl key. 'Shift + Ctrl + C' writes `03` to the teletype device just as 'Ctrl  + C'. 
 +
 +Meta (Alt) key is used to prefix a character with an ESC key. The ESC key is encoded as `1b` and is also the same key used in Escape sequences. When you press 'Alt + A' in the terminal, two bytes `1b 61` are written to the teletype device -- corresponding to the ESC key + lowercase letter 'a'. If you press 'Alt + Shift + A', the byte `61` (lowercase 'a') changes to `41` (uppercase 'A') but is still prefixed by `1b` (ESC key) -- resulting in `1b 41`. It actually makes no difference whether you use 'Alt + A', or just press ESC key then press 'A', manually.
 +
 +Super (Windows) key is completely ignored.
 +
 +Function keys are encoded as escape sequences. [Escape sequences](https://en.wikipedia.org/wiki/ANSI_escape_code) are byte sequence that include ESC key + key representing a sequence family + a sequence of bytes. Function keys F1, F2, F3, F4 belong to SS3 family (Single Shift 3) and are represented by `ESC O P`, `ESC O Q`, `ESC O R`, `ESC O S` respectively. The 'O' character represents the "Single Shift 3" family. It actually makes no difference if you press F1 or press in ESC, O, Shift + P manually.
 +
 +Arrow keys are also encoded as escape sequences. They are represented by the CSI (Control Sequence Introducer) family. Arrow keys Up, Down, Right, Left are represented by `ESC [ A`, `ESC [ B`, `ESC [ C`, `ESC [ D`. The '[' key represents the "Control Sequence Introducer" family. It actually makes no difference if you press the Up key or press ESC, [, Shift + A manually (try it!).
 +
 +Other keys like Home, End, Page up, Page down, Delete are all represented by escape sequences in some way as well.
 +
 +This behavior comes as surprising to many people who look to configure terminal programs like vim, tmux, less, etc. *What? You're saying there is no way to differentiate 'Ctrl + A' from 'Ctrl + Shift + A'??* Unfortunately no.
 +
 +## Signals
 +Terminals allow you to send signals by pressing Control key + Letter. 
 +
 +For completion, here's a table of all the other Control key + Letter:
 +```
 +Ctrl-key behavior on Linux / POSIX terminals (canonical mode)
 +
 +Key    ASCII  Name  Effect / Meaning                                 Signal
 +-----  -----  ----  -----------------------------------------------  -------
 +Ctrl+A 0x01   SOH   Beginning of line (readline)                      -
 +Ctrl+B 0x02   STX   Backward character (readline)                     -
 +Ctrl+C 0x03   ETX   Interrupt foreground process                      SIGINT
 +Ctrl+D 0x04   EOT   End-of-file on input (read() returns 0 if empty)  -
 +Ctrl+E 0x05   ENQ   End of line (readline)                            -
 +Ctrl+F 0x06   ACK   Forward character (readline)                      -
 +Ctrl+G 0x07   BEL   Bell / alert                                      -
 +Ctrl+H 0x08   BS    Backspace (historical erase)                      -
 +Ctrl+I 0x09   TAB   Tab / completion                                  -
 +Ctrl+J 0x0A   LF    Line feed (newline)                               -
 +Ctrl+K 0x0B   VT    Kill line forward (readline)                      -
 +Ctrl+L 0x0C   FF    Clear screen                                      -
 +Ctrl+M 0x0D   CR    Carriage return (Enter)                           -
 +Ctrl+N 0x0E   SO    Next history entry                                -
 +Ctrl+O 0x0F   SI    Execute and fetch next history entry              -
 +Ctrl+P 0x10   DLE   Previous history entry                            -
 +Ctrl+Q 0x11   DC1   Resume output (XON)                               -
 +Ctrl+R 0x12   DC2   Reverse search (readline)                         -
 +Ctrl+S 0x13   DC3   Pause output (XOFF)                               -
 +Ctrl+T 0x14   DC4   Transpose characters                              -
 +Ctrl+U 0x15   NAK   Kill entire line                                  -
 +Ctrl+V 0x16   SYN   Quote next character                              -
 +Ctrl+W 0x17   ETB   Delete previous word                              -
 +Ctrl+X 0x18   CAN   Readline command prefix                           -
 +Ctrl+Y 0x19   EM    Yank (paste)                                      -
 +Ctrl+Z 0x1A   SUB   Suspend foreground process                        SIGTSTP
 +Ctrl+\ 0x1C   FS    Quit and dump core                                SIGQUIT
 +Ctrl+] 0x1D   GS    Escape character (telnet, etc.)                   -
 +Ctrl+^ 0x1E   RS    Rarely used                                       -
 +Ctrl+_ 0x1F   US    Undo (readline)                                   -
 +```
 +
 +You can inspect these with:
 +```
 +stty -a
 +```
 +You can change the `SIGINT` (interrupt i.e. `intr`) from Contrl + C to e.g. Ctrl + K like this:
 +```
 +stty intr ^K
 +```
 +
 +The `stty` command is used to inspect and change the terminal discipline.
 +
 +Note that caret `^` prefix (such as here) often refers to the Control key in documentation and elsewhere.
 +
 +## Echo (Attribute)
 +Echo is when you type on your keyboard and the terminal echoes your keys back on the screen, so that you can see what you're typing. Terminals let you turn the teletype echo on/off. Commands like `passwd`, for example, turn the echo off when the user is entering a password.
 +
 +You can turn the echo off:
 +```
 +stty -echo
 +```
 +
 +You can turn echo back on (or use the nuclear option a.k.a. the `reset` command):
 +```
 +stty echo
 +```
 +
 +This is unerlated to the `echo` command but the concept is similar. They're both named that way for similar reasons.
 +
 +## Escape sequences
 +[ANSI escape sequences](https://en.wikipedia.org/wiki/ANSI_escape_code) are byte sequences which the terminal interprets in a special way. They always start with the ESC byte `0x1b`, which is usually written as `'\e'`, `'\033'` (octal), `'\x1b'` (hexadecimal).
 +
 +The byte
 +```
 + ESC   Bytes   Abbr. Description
 ++-----+-------+-----+-----------------------------+
 +| \e@ | 1b 80 | PAD | Padding Character           |
 +| \eA | 1b 81 | HOP | High Octet Preset           |
 +| \eB | 1b 82 | BPH | Break Permitted Here        |
 +| \eC | 1b 83 | NBH | No Break Here               |
 +| \eD | 1b 84 | IND | Index                       |
 +| \eE | 1b 85 | NEL | Next Line                   |
 +| \eF | 1b 86 | SSA | Start of Selected Area      |
 +| \eG | 1b 87 | ESA | End of Selected Area        |
 +| \eH | 1b 88 | HTS | Horizontal Tabulation Set   |
 +| \eI | 1b 89 | HTJ | Horizontal Tabulation Just. |
 +| \eJ | 1b 8a | VTS | Vertical Tabulation Set     |
 +| \eK | 1b 8b | PLD | Partial Line Down           |
 +| \eL | 1b 8c | PLU | Partial Line Up             |
 +| \eM | 1b 8d | RI  | Reverse Index               |
 +| \eN | 1b 8e | SS2 | Single Shift Two            |
 +| \eO | 1b 8f | SS3 | Single Shift Three          |
 +| \eP | 1b 90 | DCS | Device Control String       |
 +| \eQ | 1b 91 | PU1 | Private Use One             |
 +| \eR | 1b 92 | PU2 | Private Use Two             |
 +| \eS | 1b 93 | STS | Set Transmit State          |
 +| \eT | 1b 94 | CCH | Cancel Character            |
 +| \eU | 1b 95 | MW  | Message Waiting             |
 +| \eV | 1b 96 | SPA | Start of Protected Area     |
 +| \eW | 1b 97 | EPA | End of Protected Area       |
 +| \eX | 1b 98 | SOS | Start of String             |
 +| \eY | 1b 99 | SGCI| Single Graphic Char Intro   |
 +| \eZ | 1b 9a | SCI | Single Character Introducer |
 +| \e[ | 1b 9b | CSI | Control Sequence Introducer |
 +| \e\ | 1b 9c | ST  | String Terminator           |
 +| \e] | 1b 9d | OSC | Operating System Command    |
 +| \e^ | 1b 9e | PM  | Privacy Message             |
 +| \e_ | 1b 9f | APC | Application Program Command |
 ++-----+-------+-----+-----------------------------+
 +```
 +
 +Of these, `\e[`
 +
 +```
 + Escape                  Bytes                         Abbr.  Description
 ++-----------------------+-----------------------------+------+----------------------------------+
 +| \e[ <num> A           | 1b 5b <num> 41              | CUU  | Cursor Up                        |
 +| \e[ <num> B           | 1b 5b <num> 42              | CUD  | Cursor Down                      |
 +| \e[ <num> C           | 1b 5b <num> 43              | CUF  | Cursor Forward                   |
 +| \e[ <num> D           | 1b 5b <num> 44              | CUB  | Cursor Back                      |
 +| \e[ <num> E           | 1b 5b <num> 45              | CNL  | Cursor Next Line                 |
 +| \e[ <num> F           | 1b 5b <num> 46              | CPL  | Cursor Previous Line             |
 +| \e[ <num> G           | 1b 5b <num> 47              | CHA  | Cursor Horizontal Absolute       |
 +| \e[ <num> ; <num> H   | 1b 5b <num> 3b <num> 48     | CUP  | Cursor Position                  |
 +| \e[ <num> J           | 1b 5b <num> 4a              | ED   | Erase in Display                 |
 +| \e[ <num> K           | 1b 5b <num> 4b              | EL   | Erase in Line                    |
 +| \e[ <num> S           | 1b 5b <num> 53              | SU   | Scroll Up                        |
 +| \e[ <num> T           | 1b 5b <num> 54              | SD   | Scroll Down                      |
 +| \e[ <num> ; <num> f   | 1b 5b <num> 3b <num> 66     | HVP  | Horizontal and Vertical Position |
 +| \e[ <num> m           | 1b 5b <num> 6d              | SGR  | Select Graphic Rendition         |
 +| \e[ 4 i               | 1b 5b 34 69                 | MC   | Media Copy (Aux Port Off)        |
 +| \e[ 5 i               | 1b 5b 35 69                 | MC   | Media Copy (Aux Port On)         |
 +| \e[ 6 n               | 1b 5b 36 6e                 | DSR  | Device Status Report             |
 +| \e[ ? <num> h         | 1b 5b 3f <num> 68           | SM   | Set Mode (Private)               |
 +| \e[ ? <num> l         | 1b 5b 3f <num> 6c           | RM   | Reset Mode (Private)             |
 +| \e[ s                 | 1b 5b 73                    | SCP  | Save Cursor Position             |
 +| \e[ u                 | 1b 5b 75                    | RCP  | Restore Cursor Position          |
 ++-----------------------+-----------------------------+------+----------------------------------+
 +```
 +
 +## Attributes
 +
 +## Color
 +
 +## Font
 +
 +## Mouse
 +
 +## Capabilities
 +
 +## Scripting
 +When you're [[shell-scripting|scripting]], it's often useful to know what terminal the user is using. For example, does the terminal support color? However there is actually no way to definitively say which terminal the user is using from the shell alone. All you can do is check the `$TERM` variable which the user can spoof.
 +
 +## Types
 +The following are terminal types differentiated by what teletype device they're attached on:
 +
 + - [[terminal-emulator|Terminal emulator]] attached on e.g. `/dev/pts/1`
 + - [[virtual-console|Virtual console]] attached on e.g. `/dev/tty1`
 + - [[serial-line|Serial line]] attached on e.g. `/dev/ttyS0`
 + - [[serial-usb|Serial USB]] attached on e.g. `/dev/ttyUSB0`
 +
 +
 +## F.A.Q. (Terminology)
 +### Is terminal a program, like bash?
 +Strictly speaking, no! A terminal is anything that allows a human to communicate with a teletype device. Anything that looks like a keyboard + screen attached to a teletype device can be called a terminal. It doesn't have to be a program!
 +
 +This makes it a bit confusing because when most people say "open the terminal" they mean a [[terminal-emulator|terminal emulator]], like xterm. In this case a terminal is an actual graphical program, yes. But in case of a [[virtual-console|virtual console]] there is no additional program. You are interacting with Linux kernel itself. In that case there is only you + bash + Linux kernel.
 +
 +### What's the difference between "terminal" and "console"?
 +The words "console" and "terminal" are often used interchangeably. Usually, the word "console" refers to a kind of master terminal -- the one provided by the system itself. For example, [[virtual-console|virtual console]] is a type of terminal provided by Linux kernel which you can access by pressing `Ctrl + Alt + F1-6`. The word  "terminal" refers to a more general concept of "keyboard + screen attached to a teletype device".
 +
 +### What's the difference between "terminal" and "TTY"?
 +The word TTY is often used interchangeably with the word terminal. But TTY is actually a shorthand for "teletype device". A terminal can be attached to a teletype device to allow a human to use it, but a terminal is not a teletype device itself. Teletype devices are exposed in `/dev` directory (e.g. `/dev/tty1`) but there is no global list of terminals.
 +
 +### What's the difference between "terminal" and "shell"?
 +[[shell|Shell]] is a type of program that lets you run other programs. It sits on the other end of the teletype device. Both of you communicate via a teletype device, but because you're human you need a keyboard and a screen to use the teletype device, which is called a terminal.
 +
 +### What's the difference between "terminal" and "CLI"?
 +The acronym [[cli|CLI]] stands for "command line interface". It's a type of user interface where you type in the commands in a one line (hence the name) and is usually associated with the [[shell|shell]]. Because the terminal most commonly runs a shell, the words "terminal" and "CLI" are often used interchangeably. However, there are other programs like 'vim', which is a terminal text editor, but which interface is not a command line.